POST OR WALL MOUNTED OUTDOOR CABINETS
outTEG OMR
outTEG OMR LITE weather cabinets They present an ideal solution for projects with high demands on the safety of the installed equipment and a stable climate in the rack with the possibility of installation on a pole or on a wall. The double-walled design of the case protects the installed components from any inclement weather, as well as vandalism, thanks to the compact structure of the cabinet that prevents access to the installed components from the outside. For extreme weather conditions, the side panel variants can be modified to allow the installation of fans or air conditioning units.
Weather resistance is mainly guaranteed by the AlMg3 alloy used for the cabinet shell and the UV-protected polyester powder paint finish applied.
MAIN ADVANTAGES
- Compact and lightweight double wall design
- Maximum protection against corrosion
- Integrated roof features
- Made of AlMg3 aluminum alloy
- Polyester powder paint with UV protection
- Non-porous PUR gasket, suitable for extreme temperatures
Description
Material
- AlMg3 Aluminum Alloy
- Coating Polyester powder paint with UV protection
Color
- RAL 7035 for outdoors
- Optionally RAL 7046 for the ceiling
IP Rating
- IP65 according to EN60529 (the degree of protection may be reduced after mounting some accessories)
Mechanical protection
- IK10 according to IEC 6226
The supply includes
- Double wall outdoor cabinet, fully assembled and assembled with perforated roof
- Natural ventilation between interior and exterior walls
- Front door with two handles, key combination 333, door stop. Easily configured for a right or left hand door mount.
- Perforated internal horizontal rails on side panels
- Door stopper
* You have to order 2 sets, for 1400 to 1600 mm height you have to order 3 sets. For 800 mm wide cabinets with IDO-MR-Nxx, an IDO-MR-NB bracket must also be ordered (2 sets for 1 set of IDO-MR-Nxx).
ACCESSORIES
POLE MOUNT BRACKETS
- Material: 2mm stainless steel
- Installation: for posts up to 250 mm diameter
- Load: 200kg
- Package includes: pole mounting brackets and all necessary mounting parts (2 profile rails, 2 fastening straps (l=850mm), 8 sets: M8×12 screws, self-locking nuts and grip washers)
WALL SUPPORTS
- Material: 3mm stainless steel
- Load: 100kg
- Package includes: wall mounting brackets and all mounting parts
necessary for mounting in the cabinet
PLINTH
- Height: 100mm
- Material: 2 mm stainless steel 1.4016 (AISI 403)
- Surface finish: polyester powder paint
- Colour: RAL 7046
- You must order ID-x-SPSxx and ID-x-SPFxx
- Package includes: sockets and all necessary mounting parts
DOOR SWITCH
- Material-supports: 2 mm galvanized steel sheet
- Door switch: IP65, plastic, 1NO + 1 NC, PG13.5, -25°C to +70°C
- Use: available for outdoor cabinets with a minimum height of 500 mm
and depth 250 mm - Package includes: door switch and all necessary mounting parts
DOCUMENT POCKET
- Material: ABS
- Colour: RAL7035
- Dimensions: 234 × 241 × 31 mm (height × width × depth)
- Mounting: with self-adhesive tape
- Package includes: plastic document pocket and adhesive tape
LIGHTING UNIT
- Lamp: LED, 120° angle, 6,500 K
- Luminosity: 400 lm
- Voltage/Frequency: 24-265 V DC/AC ~50/60 Hz
- Power consumption: 5 watts
- Light control: Motion sensor
built-in, shutdown time 5 min. - Mounting: Magnets
- Operating temperature:
-30°C – 70°C - Dimensions: 357.4 × 32 × 35.5mm
(height × width × depth) - Weight: 140 gr.
- Certifications: CE, UL
EARTHING
- ID-W-EK: Complete cabinet grounding kit
- ID-W-EW68/EW88/EW8816: 300mm cable length with terminals
crimped - Kit includes: nuts, screws for grounding gate(s),
cabinet and mounting plate
RAILS FOR INTERIOR INSTALLATION
- Material: 2 mm galvanized steel sheet with 25 mm perforation
- Rail width: 75mm
- Installation: on interior horizontal rails that are part of the cabinet
- Use: available for outdoor cabinets with a minimum depth of 250 mm
- Package includes: 2 rails for internal installation and all parts
necessary assembly.
FIXED EXTRUSIONS OF 19
- Material: 2mm galvanized steel sheet
- Rail width: 56mm
- Installation: on interior rails that are part of the cabinet or on supports
ID-W-UB for 800 mm wide outdoor cabinets - Use: available for cabinets with a minimum depth of 250 mm and width
600 and 800mm - Package includes: 19″ fixed extrusions and all parts
necessary assembly.
MOUNTING PLATE
- Material: galvanized sheet steel
- Package includes: 50×50mm labeled frame mounting plate
(mounting parts are included in the cabinet accessories)
CABLE GLANDS AND NUTS WITH PG/METRIC THREAD
- Material: polyamide PA6, sealing CR (neoprene)
- Protection degree: IP68
- Colour: RAL 7035
CABLE GLANDS AND NUTS WITH PG/METRIC THREAD
- Material: polyamide/elastomer, UL-94 Vo, self-extinguishing
- Protection: IP64
- Installation: cable gland cutouts
- Cutouts for installation
at the CONTEG Modification Center - Package includes: membrane 1 unit
Individual orders are placed in the modification center, which is part of a modern industrial enterprise in Pelhrimov. The center also has a MODCentrum 29 CNC milling machine.
We can cut holes for filter fans, coolers, control panels and buttons. The cabinets can be made of sheet steel, stainless steel (AISI 304 and 316L) or aluminum.
Cutouts can be made in flat removable parts of the rack walls (doors, cable entries, side panels, ceilings and mounting plates), as well as in welded monolithic cabinets.
COOLING AND HEATING
- Material: stainless steel casing
- Protection grade: IP66
- Sealing: permanent sealing gasket made of closed cell polyethylene foam
- Connection via terminal strip
- Regulations: for more information, contact our technical service
- Package includes: ready-to-connect thermoelectric cooling unit
WARMERS
- Material: aluminum profile
- Technology: PTC, self-regulation
- ID-EH-80F-4: two heating circuits
- Penetration protection: IP20
- Installation: pressure fixing on 35 mm DIN rail EN 50022
- Package includes: heater ready to connect
THERMOSTAT FOR COOLING AND HEATING
HYGROSTAT
- Installation: 35 mm DIN rail
- Connection: screw terminals
- Humidity control range: 35-100 % HR
- Switching capacity (max. load) 5 A/230 V
- Switching hysteresis: ±3 % HR
- Dimensions (H × W × D): 67 × 50 × 38 mm
- Package includes: ready-to-connect hygrostat
DRAIN DEVICE
- Material: plastic according to UL94 V-0, umbra grey, waterproof with UV protection
- Protection grade: IP67
Sealing: NBR - Dimensions: Ø 60×49.5 mm, 17.5 mm inside the cabinet
- Water flow: 200 ml/hour
- Mounting: vertical at the lowest point, M50×1.5 thread with nut (cutout Ø 50 mm)
- Package includes: 1 piece of drainage device
PRESSURE COMPENSATOR
- Mounting: PG 29 thread with union nut (cut-out diameter 37 mm)
- Fitting position: vertical (Protection type is restricted to IP54 if fitting
position of pressure compensator is not vertical.) - Material: plastic according to UL94 V-0, light gray RAL 7035
- Protection degree: IP55
- Dimensions: Ø 65.5 × 30.5 mm
- Package includes: 2pcs of compensator
TECHNICAL DRAWINGS
HEAT DISSIPATION
